Tuesday, May 24, 2011

VOLVO S70, V70 1998-2000 VOLVO C70 1998-2004 automatic control

VOLVO S70, V70 1998-2000 VOLVO C70 1998-2004, automatic climate control. Press the two (2) vertical tabs in radio. This will be the spring tabs. Carefully pull the card removed from the radio. Let the radio set to left, resting on towel safeguard. (Do not disconnect the wiring). STEP 2. Remove the control climate by inserting your hand inside the cavity of the radio, grasping control with back and Slip gently by using the up and down, wiggle the traffic. Note: these clips can be difficult to .release. Four (4) clips will be released two (2) at the top and two (2) at the bottom. Putting completely and set aside. (Do not disconnect the wiring). STEP 3. Locate the flat spot mouth climate control on the right. Place Pro Fit VSM ® to the rear of a flat area with Jamie and use the marking pen to mark the holes using ® Pro Fit VSM as a guide. Set the VSM Pro Fit ® set-aside. Using a 5/64 "drill bit and drill down, drill holes of the pilot. STEP 4. Install the phone holder for VSM ® Pro Fit. Align the Pro Fit VSM ® pilot holes. Insert and tighten the screws supplied. (MAKE SURE THE HEAD BOLTS ARE INLINE WITH MOUNT)! Step 5. Reinstall control climate, make sure that the hook and lock control clips climate back into place. Reinstall radio.Locate the three knobs on the control of climate change. Remove the two knobs outside them firmly and pull the dostrzezeniu item is. Set aside for the spinner. For the two knobs to locate two Torx screws. Remove Torx screws using a driver. Set screws. Insert tool hook inside and as one of the holes of the spinner control and pull you. This removes the front part of the climate control from its mouth. Unplug all cables and set aside.



Download
: VOLVO S70, V70 1998-2000 VOLVO C70 1998-2004 automatic control