2006 Subaru Impreza sunroof Workshop Service manuals. Roof control system a: wiring DIAGRAM 1. ROOF B: INSPECTION. Full glass lid and open sunshade.
2) remove the cover (A), and then remove the nuts (B). Loosen the glass lid installing nuts, and then adjust the height by adding (Max: 3 pieces) or extract (min.: zero piece) shims (default: one piece).Sunroof Assembly a: removing 1) Disconnect the earth cable from the battery. 2) Remove a roof trim. 3) remove the glass lid. 4) Stop brain drain pipes from roof frame. 5) Remove space lamp wiring harness clips (A). Movable load is greater in the beginning of dragging a spring scale, so take a scale reading while sunshade
glide smoothly. 3) if the move the load exceeds specifications, check the glass lid, guidance and sunshade rail Assembly for improper installation.When you remove the clip, you must use great care does not harm the trim roof. • Rotate never sunroof motor, after removal of the 1) close the whole roof. 2) disconnect the cable from the battery. 3) remove the glass lid. 4) confirm the alignment mark (A) of the roof, square link and the Guide from the roof opening. (If the mark does not adjust, align, adjust the slider.).
Download: 2006 Subaru Impreza sunroof Workshop Service manuals
